EPSON Stylus PHOTO RX500/510
5.2.3.5 EEPROM data copy
The function is to back up → restore (to the new Main Board) the adjustment values
that have been stored in EEPROM on the Main Board. Use of this function will reduce
the man-hour for adjustment significantly.
The data to be backed up are as follows.
Table 5-2. Data to be Backed Up
Data to be Backed Up
USB ID
Head ID
Head angular adjustment value
Bi-D adjustment value
PW sensor adjustment value
1st Dot Position Adjustment
Calorific Limitation Input
Ink consumption counters
Waste ink pad counter
Note "*": For your confirmation, the adjustment values are displayed at "Adjusted items" in
the right area on the screen.
After restoration, print the check patterns for all the adjustments
C A U T I O N
above and check each adjustment value. If there is any
abnormality, make adjustment for the relevant items.
Refer to "5.2.4 Check Pattern print (p76)"
Adjustment
Page for
Adjustment
p67
p68
p68
p70
p71
p69
p72
–
p74
Adjustments by Adjustment Program
Figure 5-17. EEPROM Data Copy Screen
Revision C
75