Carriage Unit - Epson Stylus PHOTO RX510 Service Manual

EPSON Stylus PHOTO RX500/510

4.5.2 Carriage Unit

1. Middle Housing Removal. (p43)
2. CR Scale Removal. (p50)
3. Remove two screws on the left side of the FFC holder, and remove it from the
main frame.
4. Remove six screws on the guide plate, and remove it from the printer unit.
5. Remove one screw on the holder stopper, and remove it from the printer unit.
6. Remove a extention spring of the driven pulley holder.
Disassembly and Assembly
C.B.S Tite R 3x4,F/ZN
Tightening torque
⋅
:0.8 ± 0.1 N
C.B.S Tite 3x6,F/ZN
Tightening torque
⋅
:0.5 ± 0.1 N
Extention Spring
C.B.S Tite (P4),3x6,F/ZN
Tightening torque:0.8 ± 0.1 N
Disassembly and Assembly of Printer Unit
Ffc Holder
m
C.B.S Tite 3x6,F/ZN
Tightening torque:0.5 ± 0.1 N
C.B.S Tite 3x6,F/ZN
Tightening torque
⋅
:0.5 ± 0.1 N m
Guide Plate
m
Holder Stopper
⋅
m
Figure 4-8. Carriage Unit Removal-1
Revision C
⋅
m
C.B.S Tite 3x6,F/ZN
⋅
Tightening torque:0.8 ± 0.1 N m
51