Upper Housing Assembly Removal - Epson Stylus PHOTO RX510 Service Manual

EPSON Stylus PHOTO RX500/510

4.4.1 Upper Housing Assembly Removal

1. Scanner Unit Removal. (p42)
2. Remove the TPU assembly.
3. Remove four hinge screws.
4. Remove a hinge from the scanner unit.
5. Unlock the carriage.
6. Remove eight screws on bottom of the scanner unit.
7. Unhook two locations that secure the upper housing assembly to the lower
housing.
8. Remove the upper housing assembly while positioning the document table up.
Ensure that there are no stains on interior glass panel surface.
Disassembly and Assembly
C.B.P Tite 3x8,F/ZN
Tightening torque:0.6 ± 0.1 N
Upper Housing Assembly
C.B.P Tite 3x10,F/ZN
Tightening torque
:0.7 ± 0.1 N
C.B.P Tite 3x8,F/ZN
Tightening torque:0.7 ± 0.1 N
Disassembly and Assembly of Scanner Unit
TPU Assembly
⋅
m
Unlock
⋅
m
C.B.P Tite 3x10,F/ZN
⋅
m Tightening torque:0.7 ± 0.1 N
Figure 4-5. Upper Housing Assembly Removal
Revision C
Hinge
C.B.P Tite 3x8,F/ZN
Tightening torque
⋅
:0.6 ± 0.1 N m
⋅
m
47