A-Tv (Analogue) D-Tv/Radio Buttons - Sharp AQUOS LC-42D83M Operation Manual

Watching TV
A-TV (Analogue)/D-TV/RADIO buttons
Use the following buttons on the remote control to
operate the menu.
A-TV D-TV RADIO
A-TV:
Press to switch to A-TV mode. After switching from
D-TV, radio or external input mode to analogue mode,
the TV jumps to the most recently viewed analogue
channel.
D-TV:
Press to switch to D-TV mode. After switching from
analogue, radio or external input mode to D-TV mode,
the TV jumps to the most recently viewed D-TV
channel.
RADIO:
Press to switch to radio mode. After switching from
analogue, D-TV or external input mode to radio mode,
the TV jumps to the most recently tuned radio channel.
FAV.
When you watch the TV for the fi rst time
When the TV powers on for the fi rst time after
purchase, perform the auto installation.
A-TV (Analogue TV)
You can run the auto installation to set channels
automatically.
To watch the analogue TV, select "Auto
1
Installation" from Setup menu. (See page 18.)
After setting the channels, you can select
2
a channel using CH r / s or 0 – 9 on the
remote control unit. (See page 19.)
D-TV (Digital TV)
When the TV accesses to D-TV mode for the fi rst time,
you need to run the auto search. To scan all available
services in your area, follow the procedures below.
To watch D-TV broadcasts, select "Auto
1
Search" from D-TV Menu. (See page 43.)
After setting the channels, you can select
2
a channel using CH r / s or 0 – 9 on the
remote control unit. (See page 19.)
37