Windows Nt 4.0 Dhcp Server; Verifying The Installation Of The Dhcp Server - Avaya 1600 Series Administrator's Manual

Server Administration
In Table 6, the 1600 Series IP Deskphone sets the system values to the DHCPACK message field
values shown.
Table 6: DHCPACK Setting of System Values
System Value
IPADD
NETMASK
GIPADD
TLSSRVR
HTTPSRVR
DNSSRVR
DOMAIN
DHCP lease time
DHCP lease renew time
DHCP lease rebind time
The system values L2Q, L2QVLAN, and PHY2VLAN are not set from a name=value pair if those
system values were previously set by LLDP. For more information, see
(LLDP).

Windows NT 4.0 DHCP Server

Verifying the Installation of the DHCP Server

Use the following procedure to verify whether the DHCP server is installed.
1. Select Start-->Settings-->Control Panel.
2. Double-click the Network icon.
3. Verify that Microsoft DHCP Server is listed as one of the Network Services on the
Services tab.
4. If it is listed, continue with the next section. If it is not listed, install the DHCP server.
42 1600 Series IP Deskphone Administrator Guide
Set to
The yiaddr field.
Option #1 (if received).
Option #3 (if received, which might be a list of IP
addresses).
The siaddr field, if that field is non-zero.
The siaddr field, if that field is non-zero.
Option #6 (if received, which might be a list of IP
addresses).
Option #15 (if received).
Option #51 (if received).
Option #58 (if received).
Option #59 (if received).
Link Layer Discovery Protocol