Helmet Hook - Triumph Tiger 1200 XR 2017 Owner's Handbook Manual

General Information
Passenger Heated Seat
• For maximum
conditions, switch the passenger
heated seat switch to the high heat
setting initially and then reduce the
heat level
passenger heated seat switch to
the low heat setting when the
passenger seat has warmed up.
• To turn the passenger heated seat
off, move the switch to its central
position. After a short delay, the
passenger heated seat symbol will
no longer be shown in the display.
Low Power Voltage Cut Off
If a low voltage is detected the heated
seats switches will power off. The
heated seats will not function again
until the voltage rises to a safe level.
The switches will not power back on
automatically even if the voltage rises to
the safe level. The ignition must be
switched off then on again to activate
the heated seats.
128
benefit in cold
by switching the

Helmet Hook

Warning
Never ride the
helmet(s) secured to the helmet hook.
Riding the motorcycle with helmet(s)
secured to the helmet hook may cause
the motorcycle to become unstable
leading to loss of motorcycle control
and an accident.
A helmet can be secured to the
motorcycle using
located on the left hand side of the
motorcycle, beneath the rider's seat.
ciuw
1. Helmet hook
To attach a helmet to the motorcycle:
• Remove the rider's seat (see page
125) and loop the helmet chin strap
over the hook.
• To secure the helmet, refit the seat
and lock into position (see page
125).
motorcycle with
the helmet hook
1