Past Position Points; Past Position Display Motion; Stabilization In True Motion - Furuno FAR-2807(-D) series Operator's Manual

4.9.2

Past position points

You may select the number of past position points to show per plot interval as
follows:
1. Left-click the MENU box to open the menu.
2. Select 4 [TT/AIS] to open the TT
3. Select 5 [TT/AIS SYMBOL].
4. Select 5 AIS PAST POSN POINTS.
5. Select 5 or 10 as appropriate.
6. Push the right button three times to close the menu.
4.9.3

Past position display motion

The past position display may be shown in true or relative motion. Open the
TRAIL menu and set TRAIL MODE to TRUE or RELATIVE as appropriate.
4.9.4

Stabilization in true motion

The true motion past position display may be ground stabilized or sea stabilized.
The PAST POSN box shows current stabilization as TRUE-G or TRUE-S. To
change the stabilization mode, open the SPEED menu and set SHIP SPEED to
BT (ground stabilization) or WT (sea stabilization).
.
[TT AIS SYMBOL]
1 BACK
.
2 TT AIS SYMBOL COLOR
RED*/GRN/BLU/YEL*/
CYA/MAG/WHT
3 AIS ROT TAG LIMIT
000.0 ˚ /MIN
4 TT PAST POSN POINTS
5/10
5 AIS PAST POSN POINTS
5/10
6 AIS SCALED SYMBOL
OFF/ON
AIS SYMBOL menu
.
AIS menu.
* Not available on IMO type
4. AIS OPERATION
4-13