Furuno FAR-2807(-D) series Operator's Manual page 305

FURUNO
4.5 Output data sentences ABM, ACK, ALR, BBM, OSD, RSD, TLB, TLL, TTD, TTM, VSD
5. POWER SOURCE
5.1 Display unit
MU-201CR
MU-231CR
MU-170C
5.2 Processor unit
FAR-2117(-BB)/2817
FAR-2127(-BB)/2827
FAR-2827W
FAR- 2137S/2837S/2837SW 100-115 VAC: 3.0A, 220-230 VAC: 1.5A
Antenna unit
5.3
Model
FAR-2137S/2837S
FAR-2837SW
Console
5.4
Transformer ( option)
5.5
For single phase:
For triple phase:
6. ENVIRONMENTAL CONDITIONS
6.1 Ambient temperature
Display/processor/transceiver/control/power supply unit
Antenna unit
6.2 Relative humidity
6.3 Degree of protection
Display/processor/control/power supply unit
Monitor unit (MU-170C) Front panel: IP56, Chassis: IP20
Antenna unit
6.4 Vibration
7. COLOR
7.1 Display unit (MU-201/231CR) Chassis: 2.5GY5/1.5, Panel: N3.0 (fixed)
7.2 Monitor unit (MU-170C) N2.5 (fixed)
7.3 Processor unit/ Power supply unit
7.4 Control unit
7.5 Antenna unit
VDR, VHW, VTG, VWR, VWT, WPL, ZDA
24 VDC:2.3 A or 100-230 VAC: 0.7 A, 1 phase, 50/60 Hz
24 VDC:3.2 A or 100-230 VAC: 0.9 A, 1 phase, 50/60 Hz
12-24VDC: 6.0-3.0 A (-BB type)
24VDC or 100-115/220-230 VAC, 1 phase, 50/60 Hz
24VDC: 7.6A (8.5A) or
100-115 VAC: 2.6A (3.0A), 220-230 VAC: 1.6A (1.7A)
24 VDC: 8.8A (9.7A) or
100-115 VAC: 3.0A (3.4A), 220-230 VAC: 1.8A (1.9A)
( ): Value for 42 rpm antenna unit
100-115 VAC: 3.2A, 220-230 VAC: 1.6A
S-band: 200/220/380/440 VAC , 3 phase, 50/60 Hz
Antenna voltage input (100 kn)
200 VAC, 380 VAC,
3ø, 50 Hz, 3ø, 50 Hz,
220 VAC, 440 VAC,
3ø, 60 Hz 3ø, 60 Hz
3.0 A 1.5 A
3.0 A 1.5 A
115/230 VAC, 1 phase, 50/60 Hz
RU-1803: 440 VAC, 1 phase, 50/60 Hz
RU-5693: 110 VAC, 3 phase, 60 Hz
RU-6522: 220 VAC, 3 phase, 50 Hz
RU-5466-1: 440 VAC, 3 phase, 50 Hz
-15°C to +55°C
-25°C to +55°C (storage +70°C)
less than 95% at 40°C
IPX6
IEC60945 Ed.4
2.5GY5/1.5
N3.0 (fixed)
N9.5 (fixed)
SP - 3
FAR-21x7/28x7 SERIES
220 VAC, 220 VAC,
3ø, 50 Hz 3ø, 60 Hz
(HSC) (HSC)
3.5 A 3.5 A
- -
IPX0
440 VAC,
3ø, 60 Hz
(HSC)
1.7 A
-
E3519S01N-M