Factory Default - Samsung SHR-2080 User Manual

SHR-2160/2162/2080/2082 USER'S MANUAL
4

Factory Default

This restores the Network information and preset values in
SHR-2160/2162/2080/2082 to the original state at the time of factory shipment.
Factory Default will be done as follows;
- Use System / Load Factory Default in MENU or,
- If you hold on to the Mode button in Live Mode and keep pressing the CH5
button for 5 seconds, the system will return to the Factory default condition.
The front button repeats the flickering.
Classification
Time/Date/Language
System Setup
Password
HDD Mode
Camera Config
Camera Setup
PTZ Device
Screen Setup
10-7
English
Detailed Items Factory Setup
Date Format YYYY-MM-DD
Time Format 24 Hours
Language English
DST Off
Password 4321
Password Lock On
Record Lock Off
HDD repeat record Stop
HDD ending alarm Off
Video On
Audio On
CAM_01 ~ CAM_16
(SHR-2160/2162)
Title
CAM_01 ~ CAM_8
(SHR-2080/2082)
Auto Seq. 5 sec
ID Camera No.
Protocol None
Baudrate 9600
Parity None
Data 8
Stop 1
Serial Mode Half Duplex
Brightness 50
Contrast 50
Color 50
Classification Detailed Items
Duration
Event Monitoring Date
OSD Display Time
Title
Status
Monitoring
Spot Out Channel
Spot Out Event Monitor
Monitor Out
Play channel location
Multi-channel change
Normal Quality
Record Quality & Auto Deletion Event Quality
Auto Deletion
Record Mode Normal Rate
Setup
Record Rate & Video Size Event Rate
Video Size
PreEvent
Event Record Duration
PostEvent
Continuous Recording
Record Schedule
Event Recording
Sensor State
Alarm Camera
Detection Setup Alarm-Out
Duration
M.D State
Event Record Area
Setup
Motion Detection Setup Sensitivity
Alarm-Out
Duration
Video Loss Detection Setup
Video Loss Detection Setup Alarm-Out
Duration
Factory Setup
Off
On
On
On
On
CH1
Off
Composite Out
Lower right-hand corner
5 seconds
Standard
Standard
Off
7.5ips(NTSC)/6.3ips(PAL)
7.5ips(NTSC)/6.3ips(PAL)
CIF
Off
1 min.
Off
On
Off
Camera No.
None
10 sec
Off
All Area
Very High
None
10 sec
Off
None
10 sec
10-8
English