Backup; Network - Samsung SHR-2080 User Manual

SHR-2160/2162/2080/2082 USER'S MANUAL
7

Backup

Backup
If there is a device, the free space and the backup device is displayed.
Select a date, time, and camera No. to backup, and press "Start".
When you change Start Date/Time or End Date/Time, free space keeps updated in the Free Space zone.
A file name is composed of Folder/File Name. A folder is composed of the backup
date(YYYYMMDD) while a file name is composed of the time(HHMM). A file may be renamed by the
virtual keyboard. A file name can composed of the maximum 5 letters.
In case that more than one backup device is connected, click the box in the bottom of left corner to
select a backup device.
If there is no backup device, Warning sign pops up. For a USB HDD, in 5-8 HDD menu setup, run a
backup after selecting and connecting the backup device.
Press the "Stop" to stop the backup.
Pressing Cancel during the Backup returns to the upper menu but this does not affect the backup
process.
For a built-in CD, USB CD/DVD, the AVI is set up as a default, and you cannot undo the AVI check.
In the case of the 2080/2082, 8-channel information comes up.
Caution
Caution
[In Backup Process]
Pressing THE "Cancel" returns to the upper menu but this does not affect Backup process. Press "Stop" to stop the backup.
The speed of the set may down during the backup.
When backing up to USB CD/DVD or memory, you must use a smaller capacity than the device's true capacity. (Part of the capacity is
used for the system)
When trying to backup to DVD, if the capacity to backup is more than 1 GB, the number of backup capacity/1GB becomes the number
of multi-sessions.
As the file name is determined by 'the user-designated file name, 4 characters + 0 ~ the user-designated file name, 4 characters + (num-
ber of multi-sessions-1)', the number of files created are equal to the number of multi-sessions. It takes a long time because number of
backups are equal to the number of multi-sessions.
It doesn't support backing up with memory cards, flash cards, and memory sticks such as SD, CF, MMC, etc. Also, it doesn't support
USB backup with the adapters of the devices listed above.
File name's virtual keyboard does not support special keys or the space bar.
When the CD or DVD is malfunctioning, the USB CD/DVD or built-in CD tray opens and closes, then the backup will fail. In this case
when the backup fails due to media malfunction, try to backup again after changing to a new media.
W arning
W arning
The backup data could be damaged by the state of writing surface of disk in the case of CD/DVD backup.
Note
Note
SHR-2162/2082 supports the internal CD-R/W.
In case of AVI backup, the backup playback is available in the PC, but it is not available in the set.
When backing up to USB CD/DVD, built-in CD, or memory, you must use a smaller capacity than the
device's true capacity. (some capacity is used for the purpose of the system).
In the case of avi backup, you need the divX codec for playing saved files.
The divX codec can be found at www.divx.com.
5-27
English
8

Network

IP Setup
Connection Mode
Designates the kind of the network connected to the main body of
SHR-2160/2162/2080/2082.
Static IP : When the main body is connected to the network with Static IP.
Dynamic IP : When the main body is connected to the network with Dynamic IP supplied
by DHCP.
ADSL(PPPoE) : When the main body is connected to the ADSL network with PPPoE.
Bandwidth
Designates the network speed to which the main body of SHR-2160/2162/2080/2082 is
connected.
Unlimited / 2 Mbps / 1 Mbps / 600 Kbps / 300 Kbps
In case of ADSL, the bandwidth should be selected 600 Kbps or 300 Kbps.
Caution Caution
1. If the device is connected to a network with a high-speed LAN, set the bandwidth at 1
Mbps or 2 Mbps.
2. If the device is connected to a network with ADSL or low bandwidth, set the bandwidth not
to exceed 600kbps, and set the recording mode not to exceed CIF (standard).
Setting up to a high bandwidth or recording mode on a network environment supporting
low bandwidth may cause a network overload, therefore connection with the smart viewer
or image monitoring may not operate properly.
3. When connection mode is set to ADSL, the IP settings page's bandwidth is set at 300kbps
and the protocol setting page's protocol adapter is set to TCP.
Note Note
In case of ADSL, the Protocol type is fixed to TCP.
Admin Password
Used for the connection between Smart Viewer and the set with the authority of Admin.
The password can be input 8 digits in maximum.
Press "Enter" and the left numeric keys from 1 to 10(0) for setup.
The default password for ADMIN is 4321.
User Password
Used for the connection between Smart Viewer and the set with the authority of user.
The password can be input 8 digits in maximum.
Press "Enter" and the left numeric keys from 1 to 10(0) for setup.
The default password for USER is 4321.
5-28
English