Samsung SHR-2080 User Manual page 40

SHR-2160/2162/2080/2082 USER'S MANUAL
Motion Detection Setup
Motion Detection Mode
Off : Motion Detection does not operate
On : Motion Detection operates.
Area
Selects the Motion Detection area.
It is impossible to set 4 block rows(Up / Down / Left / Right) to allow them to be displayed in
all monitors.
‹ Select All
: Selects the whole area.
‹ Select Block
: Selects a block every time. Selection is done by a toggle system.
‹ Select Quarter : Splits the whole area into 4 pieces, which enables selecting a fourth of
the whole area.
‹ Clear All
: Cancels the whole area.
‹ Save & Exit
: Saves and exits.
‹ Exit
: Exits without saving.
5-23
English
Sensitivity
Sets the sensitivity of motion detection. Sensitivity grade consists of Low
High in the ascending order.
Alarm-Out
Sets the Alarm-Out when Motion occurs.
5 Alarm Outs are supported.
Select an alarm-out that you want to synchronize with the current motion channel.
Multi-selection is possible.
Duration
Sets the Alarm-Out Duration. Alarm-Out continues for the determined duration.
Off / 3sec / 5sec / 10sec / 20sec / 30sec
Video Loss Detection Setup
Video Loss State
Off : Video Loss does not operate.
On : Video Loss operates.
Alarm-Out
Selects the Alarm-Out when the current Video Loss occurs.
3 Alarm Outs are supported in the present. Select an alarm-out that you want to
synchronize with the current motion channel. Multi-selection is possible.
Duration
Sets Alarm-Out Duration. Alarm-Out continues for the determined duration.
Off / 3sec / 5sec / 10sec / 20sec / 30sec
In the case of the 2080/2082, 8-channel information comes up.
Medium Very
5-24
English