Samsung SHR-2080 User Manual page 43

SHR-2160/2162/2080/2082 USER'S MANUAL
IP
Sets the IP address for the main body of SHR-2160/2162/2080/2082 to connect with the network.
If the Connection Mode is set to Static IP, you shall type in IP yourself.
If the connection mode is Dynamic IP or ADSL(PPPoE), the IP allocated by the DHCP server or
ADSL company will be automatically displayed. In case of failure of DHCP or ADSL connection,
000.000.000.000 will be displayed. Then, press OK to retry connection to get IP.
If you continue to fail in DHCP or ADSL connection, keep the main body of
SHR-2160/2162/2080/2082 off for a while and turn it on for retry.
Gateway
Sets the Gateway Address in the SHR-2160/2162/2080/2082 main body.
Subnet Mask
Sets the Subnet Mask Address in the SHR-2160/2162/2080/2082 main body.
DNS
Sets the DNS Address in the main body of SHR-2160/2162/2080/2082. The default value of DNS
is 168.126.63.1. Generally, you don't have to alter the DNS default but you may be hard to
connect to the network sometimes if you use DHCP or ADSL.
In this case, call the network manager or ADSL company to set up a new DNS address.
ADSL User ID
If the main body of SHR-2160/2162/2080/2082 is connected with the ADSL(PPPoE) network,
input User ID subscribed to the ADSL company. You may input User ID with a Virtual keyboard as
long as 40 digits irrespective of alphabets, numbers, or symbols.
Password
If the main body of SHR-2160/2162/2080/2082 is connected to the ADSL(PPPoE) network, input
the user password subscribed to the ADSL company. You may input the password with a Virtual
keyboard as long as 40 digits irrespective of alphabets, numbers, or symbols.
Caution Caution
Be sure to set IP/Port/SubnetMask/Gateway/DNS to let Smart Viewer connect with the main
body of SHR-2160/2162/2080/2082.
Wrong IP/Port/Gateway/SubnetMask/DNS may prevent Smart Viewer from being connected
to the main body of SHR-2160/2162/2080/2082.
Please call the network manager or ADSL company to get each setting value.
Caution Caution
In case of ADSL, the audio is not played in the SmartViewer.
5-29
English
Transfer Protocol Settings
You may select either TCP or UDP for the protocol type.
If you select ADSL from the IP setup page, only TCP is available.
While TCP is selected, Audio transmission is not available.
The available Port(TCP) ranges from 554 to 998 and the port number will be changed by 4.
Once the first digit is determined, the following 3 digits will change accordingly.
The available Port(TCP) ranges from 8000 to 9760 and the port number will be changed by 160.
Once the first digit is determined, the remaining digits will change accordingly.
Unicast is set to the default value and Multicast can be selected in Unicast / Multicast.
Multicast IP will be activated and its setup is available only when Multicast is selected from
Multicast/Unicast.. Select a number from 224.0.0.0 to 239.255.255.255 for the D-Class IP
address.
TTL will be also activated and the value from 0 to 255 can be set only when Multicast is selected
from Multicast / Unicast. The default value is 5.
Note Note
If you want to connect IP Router with the main body of SHR-2160/2162/2080/2082, you shall
designate a port for SHR-2160/2162/2080/2082 in the IP Router setup menu.
The main body of SHR-2160/2162/2080/2082 uses 4 ports for TCP communication.
In addition, if you want to use the DHCP function backed by IP Router to allocate Dynamic IP to
the main body of SHR-2160/2162/2080/2082, you shall designate a port for the IP which
SHR-2160/2162/2080/2082 has been allocated by the IP Router setup menu.
If you use IP Router, you are recommended to rather determine IP and Port numbers to be
allocated to the main body of SHR-2160/2162/2080/2082 from the IP Router setup menu, set the
connection mode to Static IP for the main body of SHR-2160/2162/2080/2082, and input the
determined IP and Port number in IP Router than use the DHCP function.
Please refer to the IP Router User's Manual or call the manufacturer to set up IP Router.
5-30
English