Basic Operation Of Pan, Tilt, & Zoom; Preset Setup - Samsung SHR-2080 User Manual

SHR-2160/2162/2080/2082 USER'S MANUAL
2
Basic Operation of PAN, TILT, & ZOOM
When using a remote control device (SCC2000), it is possible to control the camera with the
remote control limited to the Samsung protocol. (refer to SCC2000 user manual) If there is
no PTZ control for 5 minutes from the DVR, PTZ mode is automatically cancelled.
This is to control PTZ with the remote viewer when there is no PTZ control.
PAN
Press the LEFT or RIGHT button in front SHR-2160/2162/2080/2082 in PTZ Camera
Control Mode to control PTZ Camera horizontally.
PTZ TELE
TILT
Press the UP or DOWN button in front SHR-2160/2162/2080/2082 in PTZ Camera Control
Mode to control PTZ Camera vertically.
PTZ TELE
ZOOM
Press the TELE/WIDE button in front SHR-2160/2162/2080/2082 in PTZ Camera Control
Mode to zoom in or out PTZ Camera.
PTZ TELE
6-3
English
WIDE VIEW PRESET
WIDE VIEW PRESET
WIDE VIEW PRESET
3

Preset Setup

Records a certain position of PTZ Camera.
Memorizes up to 20 PTZ Camera positions at the moment.
Note Note
For AD Protocol PTZ Camera, this memorizes only 7 Presets.
Press the Preset button in front of SHR-2160/2162/2080/2082 in Single Screen PTZ
Camera Control Mode to set up Preset.
PTZ TELE
After Preset setup, press ENTER.
WIDE VIEW PRESET
English
6-4