Samsung SHR-2080 User Manual page 59

SHR-2160/2162/2080/2082 USER'S MANUAL
1
Introduction
Smart Viewer is a program that a general PC user is able to install
SHR-2160/2162/2080/2082 to his PC to monitor the video and audio data in the real
time through network without going to the site where SHR-2160/2162/2080/2082 is
installed.
9-1
English
2
Feature
Thanks to the transmission of video data compressed by the MPEG-4 Video
Compression method, it can play the video images of good quality.
Thanks to the G.711 Voice Compression method, it supplies the voice data of
good quality. Use of armored MIC improves the quality of remote voice.
Thanks to the transmission of video/audio stream through RTP(Real-Time
Transport Protocol), the real-time video playback is excellent and multi-users'
simultaneous connection does not affect the transmission speed in whole abruptly.
Command & Control by RTSP(Real-Time Streaming Protocol) enables safety
control through the network.
Variable transport protocols are supported (TCP/IP, UDP(Unicast, Multicast)).
Connection is open to you at any time to monitor video and audio data by entering
IP Address only.
You can not only perform real-time recording( * .dvr format) with User's PC whereas
necessary during the monitoring but also convert recorded video files( * .dvr format)
into frame unit images((JPEG format).
Up to 3 Smart Viewer users are allowed to connect to a DVR simultaneously.
(If the multicast is used, up to 6 users can connect.)
With a Smart Viewer, you are allowed to connect to as many as 16
SHR-2160/2162/2080/2082s to monitor them simultaneously.
Smart Viewer is optimized in the resolution of 1024X768.
9-2
English