menu setup
Alarm out Schedule
You can set the conditions and operating hours for scheduled alarms.
[menu] ▼ <event> ► <Alarm out Schedule> [enTer] $%_+ [enTer]
• Alarm Out : Sets the alarm output method.
For further information on alarm output, refer to "HDD Alarm > Alarm". (Page 62)
`
- <on> : Marked in green, and always generates alarm on scheduled time.
- <off> : Marked in black, no alarm is generated even if an event occurs.
- <event Sync> : Marked in orange, generates alarm only when an event occurs.
• Apply to All Alarm out : Applies the configured schedule to all alarms.
When the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.
`
M
BACKup
You can check the backup device and set the backup schedule by channel or by time.
This product (NVR) supports only : USB memory, DVD, and external HDD supporting USB/eSATA protocols. (Page 126)
Backup
You can back up a desired portion of the recording data stored in the HDD to an external device.
[menu] ▼ <Backup> [enTer] ▲▼◄► [enTer]
72_ menu setup