Troubleshooting - Windster WS-68N30SS User Manual

TROUBLESHOOTING

12
.WARNING!!!.
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and glasses
should be worn when working on the unit. Serious injury or death
may occur if safety precautions are not followed.
Light issue LED (All not
turning on)
Speed Levels/Controls not
working correctly
Burnt / melted control
switch
Speed levels not working
correctly
Unit lacking smoke intake
Unit showing no power
indication
Unit making humming noise
/ motor not starting
Load Grinding or Noise like
sound coming from motor
Defective LED Fixture
TROUBLESHOOTING
WS-68N Series
1. Locate and Replace defective Fixture (All Fixtures run on
same circuit).
2. New Transformer/ Driver replacement may be required
1. Complete control switch replacement may be required.
2. Check Ventilation / Ducting if installed property.
1. Complete control switch replacement is required.
1. Ensure all Wiring from Control Switch and Top Junction
Box are correctly connected.
2. Complete Capacitor replacement may be required.
1. Check ducting for foreign object.
2. Ensure the ducting is properly sealed.
3. Clean filters to increase airflow.
1. Ensure power source is working properly.
2. Ensure all Wiring from Control Switch and Top Junction
Box are correctly connected.
1. Check Ducting / Dampers for proper installation.
2. Replace defective capacitor with new one.
3. Check / replace defective motor.
1. Check if fans are spinning property.
2. Ensure Articles have not fallen into Motor Housing
3. Complete Motor/Motor Housing may be required.
1. Replace LED Fixture with New LED Fixture