Sony SRP-F300 Operating Instructions Manual page 12

3-5. Changing REMOTE ID
UP
12
NOTE
• If 8 seconds pass after pressing a button, operation is canceled and the
mode will be back to the situation before starting RECALL.
• The numbers not to be stored are not be displayed.
• RECALL operation is impossible if you press RECALL/ENTER
when there is no RECALL-capable program. Also, any stored programs
which are set RECALL LOCK are never displayed. (Use an external
computer to set and release RECALL LOCK.)
• When the LOCK indicator is lit, RECALL operation is impossible.
REMOTE ID is preset at factory to 01. It can only be changed on the SRP-F300 itself.
DISPLAY
FLASHES
DOWN
RECALL
/ENTER
NOTE
• If 8 seconds pass after pressing a button, operation is canceled and the
mode will be back to the situation before starting changing REMOTE ID.
• While the LOCK indicators is lit, you cannot change the REMOTE ID.
1
Press DISPLAY button. Then REMOTE/ID
indicator lights up and currently selected
number displays set number displays.
2
Press UP or DOWN button repeatedly until
FLASHES
the number you want appears. When you keep
pressing them, the number gains or loses
continuously.
3
Press RECALL/ENTER button when the
number you want appears. The number
display changes to light-up mode from flash
mode.