Sony SRP-F300 Operating Instructions Manual page 11

3-3. Display and operation during external control
3-4. To RECALL
RECALL
/ENTER
FLASHES
UP
RECALL
/ENTER
You cannot use buttons on the front panel while you control with an external
computer. In this case, three indicators of PROGRAM, REMOTE/ID and LOCK at
DISPLAY mode indicator light up.
PROGRAM
OUTPUT STATUS
REMOTE / ID
LOCK
The number of the display indicates the current program number and each output
channel indicator indicates the output level.
RECALL of stored programs with the unit is as follows.
FLASHES
FLASHES
DOWN
1
Press RECALL/ENTER button while PRO-
GRAM indicator lights up.
Then the currently set program number
flashes and each output channel indicator
turns to flash simultaneously, meaning that it
is ready for setting output status. (Program
will not be changed until step 3.)
2
Select program number you want to RECALL
with UP or DOWN button.
Then program numbers which are possible to
RECALL flash in turn and each output
channel indicator flashes and indicates output
status of the selected program as well.
3
Press RECALL/ENTER button.
The program number will stop flashing and
each channel indicator switches to output level
indication.
11