Maintenance; Maintenance And Cleaning The Unit - ProLights NANOLASERRG User Manual

BUTTON
ON/OFF
MUSIC SHOW
AUTO SHOW
COLOR CHANGING
MANUAL MODE

- 4 - MAINTENANCE

4.1 MAINTENANCE AND CLEANING THE UNIT

Dust build up reduces light output performance and can cause overheating. This can lead to reduction of
the light source's life and mechanical wear. To maintain optimum performance and minimize wear, you
should clean your lighting products at least twice a month. However, be aware that usage and environ-
mental conditions could be contributing factors to increase the cleaning frequency.
To clean this lighting product, follow the instructions below:
• Unplug the product from power.
• Wait until the product is cold.
• Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface
and fan vents.
• Clean the glass panel (laser aperture) with a mild solution of glass cleaner or isopropyl alcohol.
• Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue, and drag any dirt or
grime to the outside of the glass.
• Gently polish the glass surface until it is free of haze and lint.
NANOLASER series
DESCRIPTION
To turn ON or OFF the fixture
Sound Activated
Sound Strobing
Auto Emotion
Auto Smooth
Cycle through programmed color, Red&Green, Green, Red (for Auto Emotion, Auto Smooth e
Sound Activated only).
A= Red strobing
B= Green strobing
C= Effect Speed
NOTE
The LED is blue. Number 1 - 9 is for sound sensitivity
setting.
"1" is the least sensitive
"9" is the most sensitive
The LED is red.
"1 - 8" is strobing from fast to slow
"0" is Off
"9" is On
"1 - 9" is speed from slow to fast
"0" is not moving
NOTE - Press the button for otate effect direction
R
11