Installation; Mounting - ProLights NANOLASERRG User Manual

NANOLASER series
9

- 2 - INSTALLATION

2.1 MOUNTING

This fixture may be mounted on the included tripod stand (fig.3), in any location, provided there is ad-
equate room for ventilation.
Moreover , you can mounting this fixture using a clamp on the two clamp hanging bolts.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the fixture's being used. When aiming the prod-
ucts, you may use the bracket adjustment knob(s). Loosen the knob(s), adjust to the desired angle, and
then tighten the knob(s) by turning clockwise. Do not use tools for this step, as it may cause damage.
• When selecting installation location, take into consideration access and routine maintenance.
• Never mount in places where the fixture will be exposed to rain, high humidity or restricted ventilation.
Fig.2
Fig.3