Montigo H38DF PRC Installation & Maintenance Manual page 27

Installing the HP38PR* Logs and Embers
Bottom Logs
The HP38PR* is supplied with seven (7) fibre logs. The two bottom
logs ("A" & "B") are mounted on the burner grate as shown in
Figure 28a.
Top Logs
Place logs "C" & "D" into their diagonal positions as shown in
Figure 28b. Log "E" is mounted on top of log 'C" as shown in
Figure 28c. Place
log "F" and log "G" into slots at each side of the unit as seen in
Figure 28d. Log "H" is to be mounted onto of log "D" as shown
in Figure 28e.
WARNING: If logs are not placed properly, excessive sooting will result.
Installing the Ember Material:
*
*
Figure 28. Place the provided embers in the 5 pronged ember holders.
Be sure to not directly cover any of the burner holes.
* Do not cover burner with embers on the sides facing the side view
glass
See Figure 1 for Side View
Log B
Figure 28a. Place Log A and B in the grate on either side of the burner.
Log C
Figure 28b. Place Log C and D diagonally across Logs A and B.
XG0211 - 151126
Installation
Log G
*
Log A
Log D
H*38DF PRC Panorama Indoor Gas Fireplace
Log E
Figure 28c. Place Log E diagonally across Log C.
Ensure that log E does not touch the grate.
Log F
Log F
Figure 28d. Place log F and Log G at opposite sides of unit onto log
slot.
Figure 28e. Place log H diagonally across log D. Log placement
complete.
Figure 28g. Evenly spread provided lava rock in tray
Section:
Log G
Log H
Page 27