Table of Contents
Advertisement
Assembly
Assembly consists of installing minor components, the
extension wings and table, fence rails, fence, and blade
guard.
To assemble the table saw, do these steps:
1. Remove the shipping brace shown in Figure 11, then
re-install the fasteners. Save the shipping brace for
later machine transport.
2. Thoroughly clean the heavy-duty rust preventative
off the gears inside the cabinet and coat them
with an appropriate metal protectant (refer to
Lubrication on Page 55 for the location of gears).
3. Pull the switch out of the cabinet cavity, then attach
the access door by inserting the hinge pins into the
hinge sockets shown in Figure 12.
4. Install the handles on the handwheels (see
Figure 13).
Model W1824 10" Hybrid Table Saw
Shipping Brace
Figure 11. Location of the shipping brace.
Hinge
Sockets
Figure 12. Access door attached.
Figure 13. Handwheel handle installed.
-16-
Access Door
Handle
Advertisement
Table of Contents
