Avaya T3 Classic User Manual page 53

_______________________________________________________________________________
Programming appointed times for automatic night service changeover:
The following table lists the possible entries for the operating states (activated/deactivated) of day
service and night services 1, 2 and 3. Code numbers are assigned to the entries. Use these code
numbers to select the desired operating states when programming.
Since you can also activate or deactivate the operating states for "automatic night service" manually at
any time by entering the corresponding function number, you will find the corresponding function num-
bers in the right-hand column of the table. These functions can also be assigned to function keys and
executed by pressing the relevant function key.
Code number
01
02
03
04
11
12
13
14
21
22
23
24
31
32
33
34
2 start times and 2 end times can be entered for each night service.
Activating one night service deactivates another active night service. Only one night
service can be active at any time and this is always the one which was activated
most recently.
Operating state
Day service
Day service
Day service
Day service
Night service 1
Night service 1
Night service 1
Night service 1
Night service 2
Night service 2
Night service 2
Night service 2
Night service 3
Night service 3
Night service 3
Night service 3
Status
of service
Activate
Activate
Activate
Activate
Activate
Deactivate
Activate
Deactivate
Activate
Deactivate
Activate
Deactivate
Activate
Deactivate
Activate
Deactivate
System functions
Function number
*60
*60
*60
*60
*61
#61
*61
#61
*62
#62
*62
#62
*63
#63
*63
#63
53