Avaya T3 Classic User Manual page 49

_______________________________________________________________________________
Programming answering station for day service:
Settings
System functions
Set to selection
Answering station
Day service
If the day service is not assigned to an answering station, any external call made to
the telecommunications system becomes a general call.
In the case of external calls via an exchange line to the telecommunications system,
a general call results when a call is supposed to reach the answering station but the
answering station is not assigned to an exchange line.
In the event of a general call, the incoming external call is signalled to all non-
restricted or semi-restricted telephones connected to the telecommunications
system. This occurs acoustically and visually in the display for system telephones,
but only acoustically for analog telephones. These telephones can also accept the
call.
Busy system telephones are called acoustically at a low volume and busy analog
telephones receive a special information tone during the call.
Fully-restricted telephones in the telecommunications system are not called in the
event of a general call.
The advantage of general calls is that you can answer an external call to your
telecommunications system at a telephone located conveniently nearby.
OK
OK
Subs. 11 is currently programmed for the day service of line 1.
You want to change this.
Subs. 12 and 13 are to be assigned to the day service of line 1.
OK
0
or e.g.
1 2 1 3
OK
Esc Esc
15
Line 1 Line 2
Day service 1: L_
1 Day service 1: L 01
S 11, _ _ , _ _
S 12, 13 , _ _
Day service 1: (next line)
Esc
Exit programming
18.09. 11:48
11 12
System functions
49