Assembling The Scooter - Drive Medical Prism 3-wheel Owner's Manual

Prism Electric Scooter
1. Push the Seat
Rotate Lever
whilst pulling up
on the seat to
remove.
2. Lift out the
battery pack
from the main
body of the
scooter.
3. Loosen the
tiller adjustment
knob and fold
down the tiller
and retighten
knob.
4. Lock the front
wheel and tiller
by pushing the
wheel lock catch
down.
Page 10 of 15

7.8 Assembling the Scooter

5. Pull up the
scooter using
the seat post,
whilst pulling
the red handle
behind the seat
post.
6. Lift the front
section up until
the lower pegs
are no longer in
contact with the
curved locking
brackets on the
rear section.
1. Position the front
and rear sections of
the Prism. Align the
lower curved
locking brackets of
the front section
with the
corresponding pegs
on the front of the
rear section.
2. Holding the lower
seat post, slowly
pivot the rear
section forward
until the curved
locking brackets
are fully connected
on to the top rear
pegs.
Owner's Handbook (Code: Z40949 Rev A)