Assembling The Scooter - Drive Medical Kite Owner's Handbook Manual

Kite Electric Scooter
2. Turn the handle
to release the
battery pack, then
lift out the battery
pack from the
main body of the
scooter.
3. Lift the scooter
so it is stood up on
its rear end.
4. Push the front
of the frame
slightly to take the
pressure off the
pin, then remove
the locking pin
from the frame.
5. Lower the front
section and then
the two sections
can be detached.
Page 10 of 14

7.8 Assembling the Scooter

After assembling the Kite, make sure the
tiller adjustment knob is fully tightened.
1.Stand the rear
section up and
insert the front
section in to the
receiver.
2. Lift up the
scooter and then
reinsert the locking
pin. Slowly lower
the front of the
scooter.
3. Lower battery
pack in to the
compartment in the
scooter and then
turn the handle to
secure the pack in
place.
4. Replace the seat
and rotate it until it
locks in to its
correct position.
Owner's Handbook (Code: Z40948)