Changing The Basic Settings - Siemens HB 43MB.20B Instruction Manual

Changing the basic settings

Basic setting
c1 Clock display
c2 Length of signal upon
completion of a cooking time
or timer period
c3 Waiting time until a setting is
applied
* Factory setting
24
Your oven has various basic settings. These settings
can be customised to suit your requirements.
Selection 1
always*
approx. 10 secs
approx. 2 secs
No other time setting option should have been set.
1. Press and hold the 0 button for approximately
4 seconds. The display shows the current basic
setting for the clock display, e.g. c1 1 for
Selection 1.
2. Use the @ or A button to change the basic setting.
3. Confirm with the 0 button.
The next basic setting appears in the display.
All levels can be viewed using the 0 button,
and changed with the @ or A button.
4. To exit, press and hold the 0 button for
approximately 4 seconds.
All basic settings are applied.
You may change the basic settings at any time.
Selection 2
only with the
0 button
approx. 2 mins*
approx. 5 secs*
Selection 3
approx. 5 mins
approx. 10 secs