Export A Configuration File To A Usb Storage Device; Import A Configuration File From A Usb Storage Device - Honeywell PM42 User Manual

Chapter 4 — Configure the Printer
Export a Configuration File to a USB
Storage Device
Import a Configuration File from a USB
Storage Device
44
You can save an .xml configuration file to a USB storage device and
install it on other printers.
1 Make sure the USB storage device has a single partition and is
formatted as FAT16 or FAT32.
2 Insert the USB storage device into the printer USB host port.
3 From the Main Menu, select Tools > USB Menu > Configuration >
Export Configuration. A list of available configuration files appears.
4 Select a file to export and press
exported, a message appears.
5 To close the message, press
6 From the Main Menu, select Tools > USB Menu > Remove USB.
7 Remove the USB storage device.
You install a saved .xml configuration file from a USB storage device to
your printer.
Note: If there is more than one configuration file on the USB storage
device, the printer imports the file that is first, alphabetically.
1 Insert the USB storage device into the printer USB host port.
2 From the Main Menu, select Tools > USB Menu > Configuration >
Install Configuration. The printer installs the configuration file:
• IPL configuration files are copied to /home/user/config/ipl.
• All other configuration files are incorporated into the current
configuration.
When the file is successfully imported, a message appears.
3 To close the message, press
4 From the Main Menu, select Tools > USB Menu > Remove USB.
5 Remove the USB storage device.
. When the file is successfully
.
.
PM42 Mid-Range Printer User Manual