Configure The Printer With Printset 5; How To Configure The Printer With Programming Commands - Honeywell PM42 User Manual

Configure the Printer with PrintSet 5

How to Configure the Printer with Programming
Commands
PM42 Mid-Range Printer User Manual
9 Configure printer settings:
a Click a menu item in the navigation pane on the left.
b To change settings, type information in the fields or select an item
from a list.
10 Click Save.
11 (Optional) To create a configuration profile that you can load at any
time, click Save As Profile, type a name for the profile, and click
Save.
12 (Optional) To reset all values and options on the page the their
default settings, click Default Settings.
PrintSet 5 is a printer configuration tool that lets you easily change
printer settings.
1 Make sure that you have Windows XP or later running on your PC.
2 Download PrintSet 5 from to www.honeywellaidc.com.
3 Connect your printer to your PC using a serial, USB, or Ethernet
connection.
4 Use PrintSet to add your printer to PrintSet and configure printer
settings.
You can send programming commands from your PC to the printer
through a terminal program (such as HyperTerminal), a serial
connection, or a network connection:
• If your printer uses the Fingerprint programming language, use the
SETUP GET command followed by the node, subnode, and
parameter setting. For example, this Fingerprint command changes
your media setting to labels with gaps:
SETUP GET "MEDIA,MEDIA TYPE,LABEL (W GAPS)"
You must log in as an itadmin to perform a SET operation, but you do
not need to log in to perform a GET operation. For more information,
see the Fingerprint Command
Chapter 4 — Configure the Printer
Reference.
37