Balance Page - GRAUPNER POLARON PRO Operating Manual

Tapping the BALANCE icon on the main page will access the balance mode. Tap the DEC/INC Buttons to toggle between
the 3 modes. Tap the Enter button to initiate the balancing process. The selected mode is used with the batteries that
are equipped with a cell balance connector (LiPo, LiIon, LiFe batteries).
68
Pressing the STOP button will cause the pop-up window to appear,
asking for a confimation that you want to stop the operation.
Tapping either the STOP or ESC button will cause the charger to either
stop or continue the cycle, respectively.
16.
BALANCE PAGE (Applied to CH 1)
Tap the BALANCE icon to access the balance mode.
(The balance connector should be installed.)
LiPo, Lilon, LiFe battery balance page
This page (left) displays the connected battery parameters.
Tapping will activate the box (blue). The battery memory can then
be selected.