Micro-processor controlled high-performance fast charger, discharger and battery conditioner for ni-cd / ni-mh, lipo / liio / limn / life and lead-acid batteries max. charge current 5 a, max. discharge current 1 a balancer function for li-batteries and ni (107 pages)
Summary of Contents for GRAUPNER ULTRA DUO PLUS 60
Page 1
Getting started ULTRA DUO PLUS 60 Order-No. 6478 Warning: The software does not take the output current of Output 3 into account when it calculates the charge power. This means that the charger will re-boot if the internal mains PSU is overloaded. If devices with a relatively high current drain (more than 1 A) - such as Peltier coolers or heating covers - are connected to the unit, we therefore recommend that you use only one of the two charge outputs, and set the power distribution to 50% / 50%, in order to prevent overloading the internal PSU.
Page 2
WARNINGS AND SAFETY NOTES • Please open the instruction file on the CD and read the complete instruction! • This product is not designed for use by children under the age of 14; it is not a toy! • Protect the charger from dust, damp, rain, heat (e.g. direct sunshine) and vibration. It should only be operated in dry indoor conditions.
Page 3
Write the battery number on each battery. Connect the battery to the selected charge output. ULTRA DUO PLUS 60 Press the ‘Dial’ button to initiate the charge process. GRAUPNER #6478 V1.0 BENUTZERNAME 3 sec. = - - - - - - - - -...
Page 4
Write the battery number on each battery. Connect the battery to the selected charge output, and ULTRA DUO PLUS 60 connect the balancer plug. GRAUPNER #6478 V1.0 Press the ‘Dial’ button to initiate the charge process. BENUTZERNAME 3 Sec. = - - - - - - - - -...