Display; Battery Name Editing - GRAUPNER POLARON PRO Operating Manual

12.1 Display

Section 1
Section 2
1. Tap the memory number box in section 1 to activate. Tap the INC/DNC buttons to set the memory number.
The numbers 0~19 are available and changeable. Press and hold the memory number box to access the battery name
page.
2. Tap the battery type, the number of cells and the capacity to activate these functions. Tapping the INC/DEC buttons
can be used to edit the battery parameters.
3. Memory copy
Tap the number box in Section 2 to activate. Tap the INC/DNC buttons to set the memory number. Tap the Enter
button to copy the battery parameters from Section 1 to the battery parameters for Section 2.
4. Tap button
IMPORTANT: The battery parameters must be entered correctly, as incorrect values may cause
the charger to damage your battery, which can result in a fire!

12.2 Battery name editing

Battery names can be written with 12 characters. Tapping the Clr button (shown in the red circles, above) erases
the default name, allowing the new name to be entered. To enter the battery names "ABC", "abc", or "123", each page
with the upper case letters, the lower case letters and the numbers with special characters should be separately
accessed by tapping the respective icons. Tapping the ESC button will return the screen to the previous page.
54
to store the battery parameters and tap ESC button to get back to the previous page.
Memory number & Battery name
Battery type
Battery voltage
Battery capacity