User Set Mode; Priority A Channel Selection; Basic Operation - Icom iF3230D Series Instruction Manual

3

BASIC OPERATION

User set mode

■
The User Set mode allows you to set seldom-changed set-
tings. If the transceiver has [User Set Mode] assigned to it,
you can "customize" the transceiver operation to suit your
preferences and operating style.
Entering the User Set mode:
Hold down [User Set Mode] for 1 second to enter the User
q
Set mode.
Push [User Set Mode] several times to select the appro-
w
priate item. Then push [CH Up] or [CH Down] to set the
desired level or condition.
• Selectable Set mode items are Backlight, Beep ON/OFF, Beep
Level, Ringer Level, SQL Level, AF Min Level, Mic Gain, Battery
Voltage, Signal Moni, Lone Worker and System Info.
Hold down [User Set Mode] for 1 second again to exit the
e
User Set mode.
11

Priority A channel selection

■
When one of the following operations is performed, the trans-
ceiver automatically selects Priority A channel.
• Turning ON the power
Priority A channel is selected each time the transceiver's
power is turned ON.
• Auto Reset
Priority A channel is selected when the Auto Reset timer
ends.
• OFF hook
Priority A channel is selected when you take the micro-
phone OFF hook.