Stewart Filmscreen Corp A Electriscreen Owner's Manual page 5

Model A Electriscreen: Owner's Manual
You will need:
Enough ladders for the personnel supporting the screen during

the mounting process
A level

Fasteners appropriate for the surface on which the screen is

being mounted
Caution
During installation, do not place the unit on an unst able cart,
stand, table, or ladder. The unit may fall, causing injury to a
child or adult and damage to the unit.
Factory Advisory
The factory advises against installing a concealed or recessed
electrical projection screen permanently. You must be able to
access and remove the unit should future service be
necessary.
Suggested solutions for removing the unit include:
A removable ceiling cover plate under the mounting

location
Access to the unit through an attic or overhead space

Unpacking
1. Remove the outer plastic covering and white wrapping paper
surrounding the screen case.
2. Do not remove the wrapping p aper surrounding the screen roller.
You should remove it only af ter the unit is hung and all electrical
connections have been made.
3. Remove the batten lock-down screws located on the back side of
the case.
Warning!
Failure to remove the batten lock-down screws can result in
permanent damage to the screen.
3