Related Manuals for Stewart Filmscreen Corp LCD Rear-Projection TV
Summary of Contents for Stewart Filmscreen Corp LCD Rear-Projection TV
- Page 1 Rigid Rear Projection Screens O W N E R ’ S M A N U A L To the Owner Installation Instructions Frame Types Maintenance RP-1005 O T H E I N S T A L L E R E S U R E T O L E A V E T H I S M A N U A L W I T H T H E O W N E R...
- Page 2 Printed in U.S.A. ©2004 - 2005 Stewart Filmscreen Corporation Stewart Filmscreen reserves the right to make changes to the product specified in this document. From time to time, this document is updated. Current versions of documentation are posted on the Stewart Filmscreen website at www.stewartfilm.com.
-
Page 3: Table Of Contents
Rigid Rear Projection Screens O W N E R ’ S M A N U A L Contents To the Owner ........2 Preparing for Installation . -
Page 4: To The Owner
O THE WNER REPARING FOR NSTALLATION Congratulations on your purchase of the finest optical viewing screen available anywhere in the world! To create Rigid Rear Projection Screens, Stewart Filmscreen fuses advanced optical coatings to various glass and plastic substrates. This provides optimized image fidelity for any viewing environment. -
Page 5: Installation
NSTALLATION Rigid Rear Projection Screens: Owner’s Manual Rigid Rear Projection Screens: Owner’s Manual Professional mounting techniques should be used. Stewart Filmscreen Corporation cannot be liable for substandard or faulty installations. General notes The screen and frame are typically shipped as one complete unit. In some instances, knocked-down, pre-drilled frame components and hardware are shipped ready for assembly. -
Page 6: Frame Types
RAME YPES P1000, P1500, and P2000 The P1000 frame requires a wall opening 2 5/8” (6.668 cm) larger in both height and width than the screen image size. Figure 1. P1000 The P1500 frame requires a wall opening 3.5” (8.89 cm) larger in both height and width than the screen image. - Page 7 Figure 5. Cross section detail Rigid Rear Projection Screens: Owner’s Manual Rigid Rear Projection Screens: Owner’s Manual Deluxe frame The Deluxe frame is 3 1/4” (8.255 cm) wide, with mitered corners and a beveled edge. It can be set into a wall or cabinet. There are also free- standing or suspended (flying) systems.
- Page 8 Wedge frame The wedge frame is used in videowalls, simulators, and command and control centers. The wedge profile tapers down on the image side to a knife edge where it contacts the screen. Multiple wedge frames can be installed in a containment frame. Figure 8.
-
Page 9: Screen Care And Cleaning
CREEN ARE AND Rigid Rear Projection Screens: Owner’s Manual Rigid Rear Projection Screens: Owner’s Manual LEANING With reasonable care, you may expect many years of trouble-free use of your Stewart projection screen. We encourage you to keep your screen clean. Avoid getting any foreign material on the screen, as cleaning may prove very difficult. -
Page 10: Product Warranty
A factory authorized returned screen arriving prepaid to our facility for inspection and proved defective due to an inherent manufacturing fault will be repaired or replaced by Stewart Filmscreen Corp. This warranty expressly does not cover any costs of removal, installation, framing, or other incidental costs to replacing the screen or returning it to the manufacturer. - Page 11 AINTENANCE OTES...
- Page 12 www.stewartfilm.com 800-762-4999 Fax 310-326-6870...