Using The Modem Cable - HP Compaq Series Hardware And Software Manual

Modem and Networking

Using the Modem Cable

To connect a modem cable:
Å
WARNING: To avoid the risk of electrical shock, fire, or damage to the
equipment, do not plug a modem cable into a network jack.
1. Turn the notebook display-side up on a flat surface near a
telephone wall jack.
2. If the modem cable has a noise suppression circuitry 1,
which prevents interference with TV and radio reception,
orient the circuitry end of the cable toward the notebook.
3. Plug the modem cable into the RJ-11 (modem) jack 2 on the
notebook.
4. Plug the other end of the modem cable into an RJ-11
telephone jack 3.
For more information about using the modem or about using
AT commands and dial modifiers, refer to the
Selection"
Only) provided in English.
10–2
or the Modem Command Guidelines (Advanced Users
"Modem Country
Hardware and Software Guide