Using Hotkey Commands - HP Compaq Series Hardware And Software Manual

Using Hotkey Commands

Initiating Standby (fn+f3)
When the notebook is on, press the
standby. When standby is initiated, your work is saved in random
access memory (RAM), the screen is cleared, and power is
conserved. While the notebook is in standby, the power/standby
lights blink.
To exit standby, slide the power switch toward the front of the
notebook.
The
fn+f3
function of the
Windows, can be changed. For example, the
be set to initiate hibernation instead of standby. For more
information about standby, hibernation, and changing the
function of the
Switching Displays (fn+f4)
The
fn+f4
connected to the external monitor port or the S-Video-out jack
on the notebook. For example, if an external monitor is connected
to the notebook, pressing the
the image between the notebook display, the external monitor
display, and a simultaneous display on both the notebook and the
monitor.
Most external monitors receive video information from the
notebook using the external VGA video standard. The
hotkey can also toggle images among other devices receiving
video information from the notebook.
The following 5 video transmission types, with examples of
devices that use them, are supported by the
■
LCD (notebook display)
■
External VGA (most external monitors)
Hardware and Software Guide
hotkey is set at the factory to initiate standby. The
hotkey, called the "sleep button" in
fn+f3
hotkey, refer to
fn+f3
hotkey switches the image among display devices
Pointing Devices and Keyboard
hotkey to initiate
fn+f3
Chapter 2, "Power."
hotkey multiple times toggles
fn+f4
fn+f4
hotkey can
fn+f3
fn+f4
hotkey:
3–7