Modem Module Cable - HP EliteBook 8740W Service Manual

3. Lift the modem module (3) straight up to disconnect it from the system board.
4. Remove the modem module.
Reverse this procedure to install the modem module.

Modem module cable

NOTE:
Before removing the modem module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a.
b.
c.
d.
e.
f.
Downloaded from LpManual.com Manuals
The modem module cable is included in the Cable Kit, spare part number 596040-001.
Battery on page
Optical drive (see Optical drive on page
drive on page 55)
Keyboard (see Keyboard on page
Switch cover (see Switch cover on page
Display assembly (see Display assembly on page
Top cover (see Top cover on page
Speaker assembly (see
47), and then remove the following components:
54) or secondary hard drive (see
63)
67)
86)
Speaker assembly on page
Secondary hard
76)
91)
Component replacement procedures 95