Setting A Multiboot Express Prompt - HP Compaq Series Hardware And Software Manual

Setting a MultiBoot Express Prompt

Use Computer Setup to set the notebook to display the MultiBoot
startup location menu each time the notebook is started or
restarted:
1. Open Computer Setup by turning on or restarting the
notebook. Press
message is displayed in the lower-left corner of the screen.
❏
❏
2. Use the arrow keys to select Advanced > Boot options, and
then press
3. In the Express Boot Popup Delay (Sec) field, select the
length of time in seconds that you want the notebook to
display the startup location menu before it defaults to the
current MultiBoot setting (when 0 is selected, the Express
Boot startup location menu is not displayed.)
4. Save your preferences and exit Computer Setup by using the
arrow keys to select File > Save changes and exit, and then
follow the instructions on the screen.
Your preferences are set when you exit Computer Setup, and they
take effect when the notebook restarts.
Hardware and Software Guide
f10
To change the language, press
For navigation instructions, press
enter.
while the F10 = ROM Based Setup
f2.
f1.
MultiBoot
B–7