Computer Setup Defaults - HP Compaq Series Hardware And Software Manual

Computer Setup Defaults

To return all settings in Computer Setup to the values that were
set at the factory:
1. Open Computer Setup by turning on or restarting the
notebook. Press
message is displayed in the lower-left corner of the screen.
❏
❏
2. Use the arrow keys to select File > Restore defaults.
3. Select the Restore Defaults check box.
4. To confirm the restoration, press
5. Select File > Save changes and exit, and then follow the
instructions on the screen.
When the computer restarts, the factory settings are restored, and
any identification information you have entered is saved.
Hardware and Software Guide
f10
To change the language, press
To view navigation information, press
while the F10 = ROM Based Setup
f2.
f10.
Computer Setup
f1.
13–3