Installing Software - HP Compaq Series Hardware And Software Manual

Multimedia

Installing Software

To install software from a CD that is included with the notebook:
1. Insert an appropriate optical drive into an optional external
MultiBay or MultiBay II.
2. Connect the notebook to a reliable AC outlet.
3. Close any open applications.
4. Insert a software CD into the optional external optical drive.
❏
❏
5. When the installation wizard is displayed, follow the
installation instructions on the screen.
6. Restart the notebook if prompted.
✎
Repeat the installation procedure for all software you want to
install.
✎
WinDVD Creator has special drive requirements for proper
installation. To install WinDVD Creator, refer to the instructions
provided with the InterVideo WinDVD Creator CD.
4–10
If autorun is enabled, an installation wizard is displayed.
If autorun is disabled, select Start > Run. Enter:
x:\setup.exe
where x is your CD drive designation
and then select OK.
Hardware and Software Guide