Using The Remote Control To Operate A Cable Converter Box, Satellite Receiver, Vcr, Dvd Player, Or Htib (Home Theater In A Box) - Toshiba 32HL95 Owner's Manual

Using the remote control to operate a cable
converter box, satellite receiver, VCR, DVD player,
or HTIB (home theater in a box)
If you have a non-Toshiba device or a Toshiba device that the remote control is not
preprogrammed to operate, you must first program the remote control to recognize the
device (if you have not already done so). See pages 24 and 25.
To use your TV remote control to operate a:
• Cable converter box or satellite receiver, set the Device Switch to CBL/SAT.
• VCR, set the Device Switch to VCR.
• DVD player or HTIB, set the Device Switch to DVD.
Press to directly access
DVD chapters higher than 10.
Accesses DVD menus.
Required by some VCRs and cable
converter boxes to change the channel.
Press to reset the title and chapter
Set to "TV" to control the TV; "CBL/SAT" to
control a cable converter box or satellite
receiver; "VCR" to control a VCR; "DVD"
to control a DVD player or HTIB.
Rewinds the tape or DVD. (Press during play mode
to view the picture moving rapidly backward.)
To view one program while recording
another, press to select TV mode.
Skips back to beginning of current DVD
chapter or locates previous chapters.
Starts tape recording.
Skips forward to locate later DVD
26
Chapter 3: Using the remote control
Point the remote control
directly at the device.
+10
DVD MENU
ENTER
CLEAR
number.
Device Switch
REW
TV/VCR
SKIP
REC
SKIP
chapters.
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Note:
Even after the TV remote control is
programmed, it may not operate certain features
on your other device. If this happens and you
wish to use those features, you will need to use
the device's original remote control.
POWER
Turns the selected device on and off.
Channel Numbers (0-9)
Press to directly access channels (as
opposed to CH y z).
TOP MENU
Accesses a DVD's top menu.
y z x •
Press to navigate DVD menus (may not
work on some DVD players).
TV GUIDE
Opens the TV Guide On Screen™.
CH y z
y selects the next higher channel;
z selects the next lower channel.
(for channels programmed into
memory only)
FF
Fast-forwards the tape or DVD.
(Press during play mode to view the
picture moving rapidly forward.)
PLAY
Begins playback of a tape or DVD.
STOP
Stops the tape or DVD.
PAUSE
Press during play or record mode to
pause the picture; press again to restart.