Adjusting The Audio Quality; Using The Stablesound Feature - Toshiba 32HL95 Owner's Manual

Adjusting the audio (continued)

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1. Press MENU and open the Audio menu.
2. Highlight Audio Settings and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Navigate Select CH RTN Back EXIT
3. Press z to highlight the item you want to adjust (Bass,
Treble, or Balance).
Audio Settings
Bass 50
Treble 50
Balance 0
StableSound
Reset Done
4. Press x • to adjust the level.
• x makes the bass or treble weaker or increases the balance
in the left channel (depending on the item selected).
• • makes the bass or treble stronger or increases the balance
in the right channel (depending on the item selected).
5. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
Chapter 8: Using the TV's features
Exit
Off
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Using the StableSound
The StableSound ® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in volume
that often happens when a TV program switches to a
commercial).
To turn on the StableSound ®
1. Press MENU and open the Audio menu.
2. Highlight Audio Settings and press ENTER.
3. Press z to highlight StableSound, and then press x • to
select On.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Navigate Back
Select CH RTN EXIT
Audio Settings
Bass 50
Treble 50
Balance 0
StableSound
Reset Done
4. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
Note: The Reset function returns your audio adjustments to the
following factory settings:
Bass ............. center (50)
Treble .......... center (50)
Balance ........ center (0)
StableSound ... Off
To turn off the StableSound feature:
Select Off in step 3 above.
®
feature
feature:
Exit
Off
71