Connecting A Personal Computer (Pc) - Toshiba 32HL95 Owner's Manual

Connecting a personal computer (PC)

This connection allows you to view the image of a personal
computer (PC) on the TV screen. When connecting a PC to the
TV, use an analog RGB (15-pin) computer cable and a PC
audio cable.
– To use a PC, set the monitor output resolution on the PC
before connecting it to the TV. The following signals can be
displayed.
• WXGA: VESA 1366 × 768 @ 60Hz
Other formats or non-standard signals may not be displayed
correctly.
– To display the optimum picture, use the PC setting feature.
(see "Using the PC setting feature" on page 74).
Signal names for mini D-sub 15 pin
connector
Pin assignment for RGB/PC
terminal
5
10
15
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
22
Chapter 2: Connecting your TV
1
6
11
Signal name
R
G
B
NC (not connected)
NC
Ground
Ground
Ground
NC
Ground
NC
NC
H-sync
V-sync
NC
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
TV upper back panel
Computer
Audio
output
Conversion
adapter
(if necessary)
Note:
• Some PC models cannot be connected to this TV.
• An adapter is not needed for computers with a DOS/V compatible mini
D-sub 15-pin terminal.
• Depending on the DVD's title and the specifications of the PC on which
you are playing the DVD-Video, some scenes may be skipped or you
may not be able to pause during multi-angle scenes.
TV lower back panel
Audio cable