Using The Pc Setting Feature; Pc Audio - Toshiba 32HL95 Owner's Manual

Using the PC setting feature

You can adjust the horizontal picture/size, vertical picture/size,
clock phase, and sampling clock.
To set the PC setting:
1. Confirm a PC is connected (see "Connecting a personal
computer (PC)" on page 22).
2. Repeatedly press TV/VIDEO to select PC input mode. (See
Selecting the video input source to view " on page 56.)
3. Press MENU and open the Setup menu.
4. Highlight PC Setting and press ENTER.
Setup
Installation
Sleep Timer
On/Off Timer
PC Settings

PC Audio

No
HDMI Audio Auto
Gray Level 2
Navigate Select CH RTN Back EXIT
5. Press yz to select the item you want to adjust.
6. Press x • to make the appropriate adjustments.
PC Settings
Horizontal Position 0
Horizontal Width 0
Vertical Position 0
Vertical Width 0
Clock Phase 0
Sampling Clock 0
Reset Done
• Horizontal position/Vertical position:
Adjusts picture left/right and up/down. The adjustment range
is within ±5 from center.
(The adjustable range may vary depending on the input mode.)
• Horizontal Width/Vertical Width:
Adjusts picture width of Horizontal and Vertical.
The adjustment range is within ±5 from center.
• Clock phase:
This function is to minimize vertical stripes on the screen.
The adjustment range is within ±15 from center.
• Sampling Clock:
This function is to remove horizontal noise and sharpen the
picture.
The adjustment range is within ±15 from center.
• Reset:
Returns to the default settings programmed at the factory. The
values in the Reset function cannot be modified.
74
Chapter 8: Using the TV's features
Exit
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
PC Audio
This function is to minimize vertical stripes on the screen. (See
"Connecting a personal computer(PC)" on page 22.)
To set the PC Audio:
1. Press MENU and open the Setup menu.
2. Highlight PC Audio.
3. Press • and then press z to select No or Yes.
Setup
Installation No
Sleep Timer Yes
On/Off Timer
PC Settings
PC Audio No
HDMI Audio Auto
Gray Level 2
Navigate Select CH RTN Back EXIT
Yes: Outputs the sound from your PC
No: Mutes the sound from your PC, and outputs the sound
from the HDMI connection
Note:
The PC Audio switch setting influences the HDMI Audio setting. If it is
set to No, the HDMI Audio setting changes to Auto.
Exit