Learning About The Remote Control - Toshiba 32HL95 Owner's Manual

Learning about the remote control

The buttons used for operating the TV only are described here. For a complete list of the
remote control's functions, see the remote control functional key chart on pages 27.
turns the TV on and off. Press POWER to turn on the TV. The red indicator on the
POWER
TV will be illuminated. Press POWER again to turn off the TV.
displays TV setting information on-screen (page 75).
RECALL
selects the video input source (page 56).
INPUT
directly tune channels. The "–" button is used to tune digital
Channel Numbers (0–9, –/100)
channels (page 60).
returns to the last viewed channel (page 60).
RTN
provides detailed information on highlighted items in the TV Guide On Screen™
INFO
system (Chapter 7).
accesses the menu system (pages 29 and 30).
MENU
activates highlighted items in the main menu system and the TV Guide On Screen™
ENTER
system.
When a menu is on-screen, these buttons select or adjust programming
Arrow buttons (yzx •)
x / • below.)
menus. (Also see
tunes to the next higher/lower favorite channel (page 38).
FAV yz
opens the TV Guide On Screen™ system (Chapter 7).
TV GUIDE
cycles through programmed channels when no menu is on-screen (page 60); functions
CH yz
as page up/down when a menu is on-screen or when the TV Guide On Screen™ system is
open (Chapter 7).
adjusts the volume level.
VOL yz
closes on-screen menus and the TV Guide On Screen™ system.
EXIT
switches between TV, CBL/SAT, VCR, and DVD modes (pages 24–26). Set to
Device Switch
"TV" to control the TV.
selects the picture mode (page 65).
PIC MODE
reduces or turns off the sound (page 70).
MUTE
cycles through the five pictures sizes: Natural, TheaterWide 1/2/3, and Full
PIC SIZE
(page 61).
accesses the home function of the channel browser feature (page 59)
HOME ( )
While watching TV, these buttons tune to the previous/next channel in the
x / •
channel history (page 58). (Also see "Arrow buttons" above.)
and jump forward and backward one day in the TV Guide On Screen™ listings
SKIP
(Chapter 7).
freezes the picture (page 64).
FREEZE
accesses the sleep timer (page 73).
SLEEP
illuminates the keypad for 5 seconds
LIGHT
28
Chapter 3: Using the remote control
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Note: The error message "Not
Available" will appear if you press a
key for a function that is not available