Reset Device - Magtek EXCELLA STX Installation And Operation Manual

Excella STX Installation and Operation
"Select Config File" Box
This option is used in conjunction with the "Restore" button. Use the "Browse" button to locate
and select a previously saved config file, then click on "Restore" to activate the options saved in
the Config file.
Save Config to PC
Click on the "Backup" button to save ALL current configuration options to a Config file on the
PC. The default filename is "excella_config.ecg".
Reset Config to Factory Defaults
Click on the "Reset to Default" button to restore ALL default factory settings.

RESET DEVICE

This option is a quick and convenient way to reset the device. A device reset must be performed
for new configurations to take effect and become active. During the reset operation, the device is
not available and the standard message "The page cannot be displayed" will be shown. This
message can be ignored.
30