Network Configuration Tab - Magtek EXCELLA STX Installation And Operation Manual

Appendix A. Built-in Web Page

Network Configuration Tab

Figure A-4. Network Configuration Tab
Device Name
The Excella STX device name provided to the DHCP server (the network server must be setup
appropriately to use this option). This name must be unique for each Excella STX device on the
network. The default factory value is "EX" followed by the unit's S/N (e.g. EX-A03LEY9).
HTTP Port
The default value is "80". Use this option to change the HTTP port value.
"Cancel Changes" Button
Click on this button to cancel the current settings being displayed on this page.
"Save Settings" Button
25