The Xseries 130 Asm Firmware Update Diskette Menu; Hardware Status And Information; Configuration Settings - IBM eServer 130 xSeries User Reference Manual

The xSeries 130 ASM Firmware Update diskette menu

The xSeries 130 Advanced System Management Firmware Update diskette updates
the IBM Advanced System Management software only. It does not affect any device
drivers, and you should not update the device drivers. You can configure the
following:
•
•
•
•
•
•
•
•
Online help is available for each option by pressing F1 while the option is highlighted.
General help is available be pressing F1 from one of the help windows. To select an
option, highlight it and then press Enter.

Hardware Status and Information

Select Hardware Status and Information for information on the current state of your
ASM hardware. When you finish viewing this information, press Esc to return to the
main option menu.

Configuration Settings

Select Configuration Settings to view or change the configuration settings of your
ASM hardware. Use this option to configure the following settings:
•
•
•
•
Alert Settings
Use this option to enable or disable all critical, noncritical, and system alerts
supported by your ASM hardware. Use the arrow keys and the Tab key to move
between the fields. Use the Left Arrow key and Right Arrow key to enable or disable
each of the alerts. For online help, press F1. When you have finished, press F6 to
save and return to the main option menu. To return to the main option menu without
saving, press Esc.
Dial In/Out Settings
This option consists of two parts: Dial In (used to configure dial in settings) and Dial
Out (used to configure dial out settings). To use Dial In, use the Tab key or the arrow
keys to move the cursor to User Profile to Configure. Then use the left and right
arrow keys to select a User Profile. Once you have selected a User Profile, you can
set the following values:
•
•
•
•
•
•
•
46
IBM xSeries 130: User's Reference
Alert Setting to enable or disable alert functions.
Dial In/Out settings.
General Settings, including the Name and Number that identify this ASM
hardware, the date and time reported by the ASM hardware, assorted time-out
values, and schedule a time for the system to be powered up.
Modem Settings.
Hardware Status and Information
Configuration Settings
Update System Management firmware
Exit
Alert Settings
Dial In/Out Settings
General Settings
Modem Settings
Login ID
Password
Dialback (enable or disable)
Number (used for dialback only)
Read Only Access (enable or disable)
Dial In (enable or disable)
Dial In Delay (minutes)