IBM eServer 130 xSeries User Reference Manual page 134

8. Connect the power cord and Ethernet cable. If you are cabling to the xSeries 130
9. You can manage your server remotely from another computer on the network or
10. Go to Step 12 on page 121.
120
IBM xSeries 130: User's Reference
Shipping
bracket
Thumb
screw
model 8654 go to step 9. If you are cabling to the xSeries 130 model 8672
continue with step 11 on page 121.
Note: Ethernet port 1 is for managing the appliance server. Ethernet port 2 is for
managing Internet content.
locally with a keyboard, monitor, and mouse or other pointing device connected to
your server. If you manage your server locally, you must use the C2T device
breakout cable. Attach the large connector on the C2T cable to the C2T (Out)
connector on the rear of your server; then, connect your keyboard, mouse, and
monitor to the connectors on the end of the C2T cable.
Note: The keyboard and mouse connectors on the C2T cable have keyboard
and mouse icons to differentiate them from each other. The monitor
connector is dark blue.